>>>

VTHUB-4ACT

The VTB-Active video receiver is a 4 channel active device that allows reception of real-time monochrome (B&W) or color video via unshielded UTP cable. The unit receives four channels of video from transmitters with screw type terminals available for connections and provides 4 pairs of BNC video output.

  • 4 Channel active receiver hub, built in 4 pieces VTB-ACTIVE
  • Supports all bandbase signals including PAL, NTSC, SECAM
  • Signal Transmission via UTP cable
  • Transmission signal 1Vpp Composite Video
  • Built-in transient protection and ground lifting, which eliminates damaging voltage spike problems
  • Built-In Filter: 0~6MHz
  • Two BNC Video Outputs
  • Power supplied 12vDC
General Specifications
Supporting Video Mode All Baseband Signals including PAL, NTSC, SECAM
Signal Band 250MHz (-3dB)
Balance Band 0~6MHz
Maximum Transmission Distance Color 4000ft / 1200m, B/W 8000ft / 2400m
Interference Rejection Greater than 75dB
Video Output Connectors 4x2 Female BNC, Resistance 75 Ohms
Connector for UTP Transmission Screw Terminal Set and RJ45, Resistance 50 Ohms
Video Output Protection 2KV (common mode), 10/700μs / IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection 2KV (different mode), 2KV (common mode) / IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection (Over Current) 100mA
Adjusting Switches 4 Blue Adjusting Switches per Channel
Adjusting Categories Passive Balun: 0~50m, 50~250m, 250~400m, 400~500m, 500~700m / Active Balun: 0~600m, 150~750m, 300~900m, 450~1050m, 600~1200m
Power LED Red
Signal LED Yellow
MTBF 30,000+ Hours
Adaptive Voltage Arrange 12V DC
Power Consumption Less that 500mw

Environmental Specifications
Operating Temperature 32°F ~ 122°F / 0°C ~ 50°C
Relative Humidity 0~95%
Storage Temperature -40F ~ 302°F / -40°C ~ 150°C

Physical Specifications
Dimensions (L x W x H) 190 x 95 x 44 mm
Material Metal
Color Black
Weight 600 g
Product Specification Sheet Download