>>>

BNC-GLI

Genesis CCTV's video ground loop isolator reduces ground loop interference with CCTV signals. It can be installed easily to a new system or as an additional isolator in an existing system. The isolator is useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.

  • BNC male to BNC female with mini cable - 7.87" 200mm on both sides
  • Built-in TVS (Transient Voltage Suppressors) for surge protection
  • High Performance to eliminate ground loop system
  • Low video loss, Bandwidth: 0-3dB / 0-10MHz
  • Passive; No power required
  • Prevents video-signal distortion caused by video ground loops
  • Eliminates picture tearing, cross talk, and rolling
  • Prevents power cables laid by others interfering with the CCTV system.
  • It is useful where a video signal is transmitted via cable between points with different ground potentials
General
Isolation Voltage 800V DC
Cable Connections BNC Male to BNC Female
Insertion Loss 0.5 dB
Frequency Reponse 0-3dB / 0- 10MHz
Input/Output Resistance 75 Ohms
Insultation Resistance 100M Ohms
Electricity Protection The 1a contact discharges 3 levels of 1b air to discharge 3 levels to carry out the standard: IEC6100-4-2
Surge Protection 4kV 10/700us, carries out the standard: IEC61000-4-5
Mean Time Between Failture (MTBF): 10,000 hours

Environmental
Operating Temperature 68° F ~ 131° F / 20°C ~ 55°C
Storage Temperature -40° F ~ 176° F / -40°C ~ 80°C
Humidity 95%

Physical
Material ABS Plastic
Weight 0.14 lbs. / 65g
Dimensions 1.81” x 1.06” x 0.71” with 2x 7.87” cable
Product Specification Sheet Download
Product Manual Download